Have you ever wondered if there is a less labor-intensive way of cleaning shower tiles without scrubbing?
Many homes increasingly prefer tile flooring over carpeted floors—kitchens, bathrooms, and even living rooms are often tiled in many homes.
Tile flooring is both long-lasting and straightforward to maintain. However, the tiles deteriorate as time passes, and the shine fades, exposing any dirt collection.
The dirt that has collected can stain, discolor, and even make the tiles seem unsightly.
After showering, soap scum accumulates, and everyday water exposure is one of the numerous reasons why the tiles become discolored.
Generally, cleaning your bathroom tiles should be quick and straightforward.
The traditional methods of cleaning bathroom shower tiles are exhausting and time-consuming.
Nonetheless, in the following tutorial, I will walk you through several simple techniques to clean shower tiles without scrubbing.
10 Stunning Ways To Clean Shower Tiles Without Scrubbing
Baking soda, also known as bicarbonate of soda, is highly effective in removing unpleasant odors and stains from the shower.
Combine baking soda and water to make a paste—the thickness of toothpaste. Apply the paste over the tiles and into the tile, grout until the areas that need to be cleaned are entirely coated.
If you need to increase the cleaning performance, spray the baking soda paste on the tiles with your vinegar spray solution. As the vinegar reacts with the baking soda, you’ll see some bubbling—this is excellent since the bubbling motion removes dirt.
Wait a few minutes, then use a rough/coarse-textured piece of clean cloth to wipe off the mixture in a circular motion.
Rinse the area with warm water two or three times to eliminate any residue, and then pat dry with a dry towel. Dry thoroughly to minimize moisture buildup, which can contribute to mildew growth.
Hydrogen peroxide is both ecologically friendly and widely available in most pharmacies and prominent merchants. It is also a less expensive cleaning solution compared to ‘off the shelf alternatives.
To produce a cleaning solution in a spray bottle, mix 1 part Hydrogen Peroxide to 2 parts water, thus for every half cup of Hydrogen Peroxide, add 1 cup of water.
Allow this combination to soak in for around 30 minutes after spraying it liberally over the shower tiles. After a few minutes, scrub through the tiles to remove soap residues.
After carefully wiping the tiles, dry them with a clean towel, being sure to soak up any water that has gotten into the tile grout.
Hydrogen Peroxide is efficient in removing stains from tile grout. Add one part hydrogen peroxide, two parts baking soda, then apply the paste to the grout for around half an hour.
Eliminate the paste by wiping it away hard with a rough textured cloth, and then wash the tiles and grout to discard any residue. When you’re done, use a clean towel to dry completely.
Prepare a cleaning solution at home by combining white vinegar and 12 ounces of dishwashing soap. Then place them for a few minutes in a microwave.
After that, pour the solution into a spray bottle and shake it to mix them thoroughly. Spray the cleaning solution on the tiles simply—it works perfectly to eliminate the usual spot.
Suppose there is sticky dust in your grout line; it’s’ recommended to make a mixture of baking soda and hydrogen peroxide. Then, wait a few minutes for the solution to settle on the tile. Finally, thoroughly wipe the tile with clean water to eliminate any embedded dirt.
If you have mildew in your grout lines, this is the most acceptable cleaning method to use. Create a cleaning solution in a bucket by combining hot water and Clorox. The ideal bleach concentration should be 25 percent.
Then, using a grout brush, scrub away the repulsive dirt. The bleach works like a charm, preventing the mildew from reappearing.
If the mildew remains on the floor, you can apply bleach directly by forming a paste with toilet paper. Squish it on the mildew area while wearing rubber gloves. After that, set it aside for 12 hours. Lastly, wipe away the paste and cleanse the tile and grout line to remove any remaining dirt.
Bleach, on the other hand, is a corrosive chemical. It does not apply to all types of tiles—If you do not treat it correctly, it will degrade the color of your tile flooring.
Application of a magic eraser is the simplest method to eliminate a stain or dirt from tile floors.
First, vacuum the floor and allow it to dry before using the magic eraser. Then, apply the cleanser to the mildew or crud-infested area. After that, set it aside for a few minutes to dry. Finally, use warm water to clean the tiled floors.
If your homemade solution is not working and you want to avert nasty chemicals, you can use steam cleaning.
Steam cleaning equipment has been developed to eliminate arm-wrenching tasks such as scrubbing tiles. A steam cleaner uses high-temperature water to spray steam instantly into the grout. All that remains is a slurry of grime, which you simply rinse off.
You can buy or lease a cylindrical steam cleaner suitable for cleaning shower tiles—certain cleaners include nozzle attachments for various surfaces.
Wipe on tiny portions until they are thoroughly clean before moving on to the next. Rinse the filthy water off the tiles as soon as possible so that it does not sink back into the grout.
7. Oxygen Bleach is an Option
Before using Clorox bleach, always utilize oxygen bleach—it is less harsh than Clorox bleach. The cleaning power of oxygen bleach is widely recognized for removing dirt and grime from grout lines.
Besides, applying oxygen bleach in cleaning filthy shower tiles is easy as it doesn’t need much energy to scrub. Combine two-gallon buckets of warm water and three teaspoons of oxygen bleach. Allow at least fifteen minutes for the mixture to settle on your shower tiles and grout.
If the tiles are still unclean, make an oxygen bleach paste with a few drops of water and apply it to the grout and tiles. Using a small toothbrush, scrub away the grime and clean your bathroom. Furthermore, after using bleach or any other strong cleaning solution, make sure to ventilate your bathroom.
They are commercial cleaning solutions designed to remove mold and mildew from grout.
While using such items, make sure to follow the directions provided by the manufacturer. Also, ensure that you are wearing the appropriate safety equipment.
Mold and mildew will always grow due to moisture due to continuous use, and the tiles are constantly exposed to water.
However, you can regulate how quickly and efficiently they grow, allowing you to keep your bathroom clean for an extended period.
- Spray the shower tiles using a vinegar solution daily or at least three times every week.
- After taking a shower, squeeze or clean your bathroom floor and tiles to remove any debris and soap scum.
- Use liquid soap instead of solid soap, which leaves a lot of soap scum.
- Allow your shower to dry—mold and mildew do not grow fast in dry shower areas.
You can acquire oxygen bleach in powder form at significant shops such as Lowes. Mix three teaspoons of bleach into a two-gallon pail or container of warm water for 30 seconds. Soak a cleaning cloth in the solution and rub it over the tiles and grout.
Allow the bleach cleaning solution to remain on the tiles and grout for 15 minutes before rinsing thoroughly with water. If you still have persistent stains sticking to the grout, use the following method:
Combine the bleach powder with a bit of water until it forms a sticky paste. Apply this paste to the troublesome regions with an old toothbrush and wait 10 minutes before wiping it away with a rough cloth.
Once you’ve rinsed thoroughly to eliminate paste residue, gently dry with a clean towel, after applying the bleach, leave the shower door open for a few minutes and open the bathroom windows to air the space and remove any residual bleach scents.
Chlorine bleach is a very effective cleanser that also serves as a disinfectant. However, only use old scrubbing clothes/towels if you apply chlorine bleach to harm textiles.
Additionally, open the windows and keep the shower door open to avoid a build-up of solid bleach odors—chlorine bleach has a powerful smell; therefore, you should use it with caution.
When using chlorine bleach, never combine it with vinegar or ammonia-based solutions since these might generate hazardous fumes.
Apply a combination of a quarter cup bleach to a gallon of water to the tiles and grout, then let it settle for 15 minutes. Rinse the tiles well to eliminate any chemical residue. Use Chlorine Bleach only after all other cleaning agents have failed – using it too frequently will damage the grout between your tiles.
Keeping your shower clean might be a challenge if you don’t have the appropriate supplies and equipment.
Without a doubt, the secret to cleaning shower tiles without scrubbing is dependent on the cleaning tools you use.
However, I have provided ten effective techniques for cleaning shower tiles without scrubbing in the preceding post. Employ them and make your washroom a convenient place.